Fault Code 55
Description: End of message
Power loss light: Off
Limp-in mode: None
No further fault codes are stored. If this is the only code received,
then there are no codes stored in memory. This code will always be
given, even if nothing is wrong. If you do not get this code, then
you may not be retreiving the codes properly, or the power loss light may
be burnt out. The light should come on for 1 second when the ignition
is initally turned on as a bulb test.
- No further codes in memory
This page is maintained by Russell W. Knize and was last updated 08/28/98.
Comments? Questions? Send email.
Copyright © 1996-2003 Russ W. Knize